Build Blokees Saint Seiya Phoenix Ikki Model Kit

Quick answer

Assemble the Blokees Saint Seiya Champion Class Phoenix Ikki model kit by following the numbered runner layout, dry-fitting joints, and using the pre-painted parts for a snap-fit build. Watch for loose connections on the shoulder armor and waist.

Assembly steps

1. 1. Sort and check the runners: Lay out all runner sprues by letter. Verify no parts are missing or broken. The Phoenix Ikki kit has multiple small armor pieces—keep them together on a tray. Missing a piece now is easier to fix than halfway through. Contact support if anything is damaged.
2. 2. Cut parts carefully: Use side cutters (nippers) to snip parts from the runner, leaving a small nub. Trim the nub flush with a hobby knife or file. Common mistake: cutting too close to the part can gouge the plastic. Sand or file the nub, don't snap it off.
3. 3. Dry-fit before pressing together: Test-fit joints by hand before applying full pressure. The shoulder armor and waist connectors are known to be tight—dry-fitting helps you see if you need to sand the peg slightly. Forcing a dry-fit may crack a peg. Adjust gently.
4. 4. Assemble the torso and head: Snap the chest plate to the back piece, then attach the head. The pre-painted face and hair parts align with small tabs. Common mistake: reversing the hair piece—the front has a slight notch. Check the instruction sheet orientation before pressing.
5. 5. Build the arms and shoulder armor: Attach the upper arm, forearm, and hand. The shoulder armor clips over the shoulder joint. Common mistake: the shoulder armor can pop off if not fully seated—push until you hear a click. If the armor feels loose, check that the peg is fully inserted.
6. 6. Assemble the legs and waist: Snap the hip piece to the waist, then attach each leg. The waist connector is the most fragile part—support it from behind when pushing in the legs. Common mistake: twisting the leg can snap the peg. Push straight, do not twist.
7. 7. Attach the wings and final accessories: The Phoenix Ikki wings slide into slots on the back. They are symmetrical but have a left/right orientation—check the shape. Finally, add the hand-held effect part if included. Wings may be tight; wiggle gently side to side to seat them.

Product facts

• Blokees Saint Seiya Champion Class 12 Phoenix Ikki Model Kit: Officially licensed assembly character toy recreates the character’s manga appearance with detailed armor design, pre-painted color separation, and dynamic posing options. You get a display-ready figure straight from the box without needing to paint or glue, but the pre-painted finish means you cannot easily change colors later.