How to Care for Jujutsu Kaisen Ani-Art Acrylic Stands

How to Care for Jujutsu Kaisen Ani-Art Acrylic Stands

By OtakuPop | Anime Figures, Blind Boxes & Collectible Toys | Published: 2026-11-03

Category: 技巧與保養

Keep your Jujutsu Kaisen Ani-Art acrylic stands clear and scratch-free with a simple cleaning, handling, and display routine that protects the print and the edges.

Quick answer

Clean your Ani-Art acrylic stand with lukewarm water, a drop of mild dish soap, and your fingertips or a soft microfiber cloth, then pat dry with a microfiber towel. Store and display it away from direct sun and handle it by the base or edges to prevent scratches and print damage.

Why Ani-Art acrylic needs a gentler routine

Ani-Art stands from Arma Bianca use a refined illustration style printed on acrylic, so the artwork sits on the surface rather than being sealed under a thick layer. That makes the print more vulnerable to abrasive cleaners, alcohol, and rough wiping than a plain plastic figure.

The acrylic itself is also prone to fine scratches and can cloud over time if cleaned with paper towels or scoured with a dry cloth. A gentle routine protects both the image and the clarity of the stand.

When to clean and when to leave it alone

You do not need to clean an acrylic stand on a fixed schedule. Dust it lightly when you notice buildup, and do a deeper wash only when fingerprints, smudges, or sticky residue appear. Over-cleaning increases the chance of scratches and print wear.

If your stand is displayed in a sunny window or a busy shelf, check it every few weeks for dust and grime. In a closed cabinet, a light dusting every month or two is usually enough.

Step-by-step care routine

  1. 1. Clear a soft, clean workspace: Lay a clean microfiber towel on a flat surface and keep your stand away from the edge. Remove rings or watches that could catch the acrylic. Never clean over a hard counter or near a sink drain where a dropped stand can crack or disappear.
  2. 2. Dust before you wet: Use a dry microfiber cloth or a soft camera brush to lift loose dust from the front, back, and edges. Work in light strokes rather than pressing hard. Skipping the dry dusting step is a common mistake: wetting dust can create a muddy film that takes more rubbing to remove.
  3. 3. Wash with lukewarm water and mild soap: Fill a bowl with lukewarm water and add one drop of mild dish soap. Dip your fingertips or a soft microfiber cloth, then gently wipe the acrylic in straight lines. Do not soak the stand or use hot water. Avoid alcohol, glass cleaner, acetone, and abrasive cleansers, which can cloud the acrylic or lift the printed image.
  4. 4. Rinse and pat dry: Rinse the stand under a slow stream of lukewarm water or wipe with a clean damp cloth. Shake off excess water and pat dry with a dry microfiber towel. Let it air dry completely before reassembling. Do not rub vigorously with a paper towel; paper fibers can leave fine scratches and lint behind.
  5. 5. Handle by the base and edges: When inserting the stand into its base or moving it, hold the thick base or the outer edges. Keep your fingers off the printed face. Touching the printed area with bare fingers is a common way to leave oils that attract dust and dull the image over time.
  6. 6. Display away from sun and heat: Place the stand in a spot that avoids direct sunlight, radiators, and humid areas. If using a shelf or cabinet, leave a little space around the stand so it does not rub against other items. UV light and heat can fade prints and warp acrylic, so a shaded, stable spot is better than a bright window ledge.
  7. 7. Store extras safely: For stands not on display, keep them in a dust-free box with a soft cloth or acid-free tissue between pieces. Store flat or upright without weight on top. Stacking acrylic stands directly on top of each other is a common cause of scratches and chipped edges.

Product facts

  • Jujutsu Kaisen Ani-Art Acrylic Stand Blind Box Official Arma Bianca Anime Figure: The Jujutsu Kaisen Ani-Art Acrylic Stand Blind Box is an official Arma Bianca series with 15 possible designs, sold as a single random box or a 15-piece case pack. Because the print style is the main draw, cleaning gently preserves the illustration you received, and a case pack helps you avoid duplicates if you want the full set.
    Jujutsu Kaisen Ani-Art Acrylic Stand Blind Box Official Arma Bianca Anime Figure
    Jujutsu Kaisen Ani-Art Acrylic Stand Blind Box Official Arma Bianca Anime Figure

Shop Related Products

咒術迴戰 Ani-Art 壓克力立牌 盲盒 官方 Arma Bianca 動漫公仔

咒術迴戰 Ani-Art 壓克力立牌 盲盒 官方 Arma Bianca 動漫公仔

$5.91 $7.99

Shop Now